Western Australia can throw four seasons at you in one day. A Perth summer bakes the north wall, the sea breeze finally arrives, and winter mornings still bite. That is why old WA builders still have something useful to say. They worked without reverse-cycle air conditioning as a given, so they paid close attention to sun angles, breezes, shade and thick materials. In this post, we look at what their choices teach us about climate design today. We will cover the evidence, the practical moves for orientation, shading, ventilation and materials, how one state holds many climates, and what right-sizing and retrofitting mean for WA. It is not about nostalgia. It is about useful lessons.
Why WA’s Climate Makes Older Building Knowledge Relevant
Western Australia’s south-west corner and south coast sit in NCC climate zone 5 and zone 6, with Perth named among Australia’s warm temperate coastal cities, where winters are cool and summers very hot. CSIRO’s guide to designing for temperate climates sets out what that means for a home. That shapes the brief: a well-designed home here needs very little heating or cooling across spring and autumn, but summer heat is severe, and in mild temperate areas winter energy use can still climb.
The ABCB Climate Map is the regulatory reference. It shows NCC climate zones, relative humidity patterns and alpine areas, so you can see how a site’s location changes the requirements a building must meet. Elevation shifts things again: CSIRO uses Toowoomba, roughly 700 m above sea level, to show how altitude changes local climate, which matters for WA’s inland and hill country. If you’re planning a build, getting the zone right early saves rework later.
This climate has always been here. So what did earlier Western Australian builders already work out that we have quietly stopped doing?
Reading the Evidence: What Heritage Records Can and Cannot Tell Us
Here’s the honest starting point: no single source documents how earlier WA builders reasoned about climate. The best places to begin are Heritage Council of Western Australia place records, State Register entries and local vernacular housing histories.
That said, heritage material has real limits. The Heritage Council’s records exist largely for governance, listing and significance, so they tell you what is protected and valued, not how a building actually performed in summer. The State Register, for instance, is a statutory list of places representing WA’s history and development.
So read the building itself. Verandahs, roof overhangs, ceiling heights, louvres, window positions and orientation are physical evidence, and place records can help date construction and identify materials.
Language matters here too. We’ll say what heritage records suggest, or what we can verify, rather than claiming every early builder was deliberately designing for climate.
The rest of this article compares those observable features with current CSIRO, ABCB and YourHome guidance. That keeps the historical side honest and the modern side useful. If you’re weighing renovating rather than rebuilding, that guide covers approvals and heritage considerations.
Orientation and Cross-Ventilation: The Lesson That Has Not Changed
Orientation is the one decision you cannot renovate your way out of. CSIRO’s temperate-climate guidance is direct: living areas and family rooms belong on the north side, while bedrooms, laundries and bathrooms sit on the south.
Cross-ventilation works when air enters through an opening on one side and exits on another. CSIRO flags it as especially important during summer, when Perth’s heat does its worst.
Heritage records suggest older WA plans often landed close to this pattern, with narrow footprints and openings on facing walls. Read that as suggestive, not proven intent.
Renovations break it in predictable ways: internal layouts that interrupt airflow, deep rooms with one window, and sealed additions. YourHome treats airtightness as ventilation’s partner. Controlled airflow and sealing unwanted draughts are two different jobs, planned together.
If you’re weighing how far to open things up, our guide to zoning and orientation choices covers daylight, layout and shading.
Shading and Glazing: Where Older Buildings Got It Right
Cross-ventilation only does so much once sun hits the glass. CSIRO’s rule is simple: keep total window area modest relative to floor area, and favour north-facing glazing over east and west.
Why east and west? Their low morning and afternoon sun is hard to shade, and it hits hardest when the building is already warm.
YourHome’s passive cooling guidance points to external shading, shutters and blinds, pergolas and planting. External shade wins because it stops heat before it reaches the glass, while internal blinds sit behind it and trap warmth inside.
Verandahs are the recognisable version of this in older WA buildings: fixed shade that also keeps rain off. Place records can tell you the depth and orientation on a specific building, so you can see how much summer sun it actually blocks.
The rule to carry into a new build: size overhangs and planting to block high summer sun while still letting winter sun reach living areas. Treat shading as step one. Designing energy-efficient homes in Perth starts here too, well before any glass upgrade.
Materials, Thermal Mass and What Actually Works Here
Shading stops the sun before it lands; materials handle the heat that gets in anyway.
Thermal mass means heavy walls and floors that soak up heat through the day and release it later. That suits hot days and cool nights, but only with night purging, flushing stored heat out overnight with cool air. Without it, your mass simply banks summer heat.
YourHome’s thermal mass guidance treats mass as one part of a passive design toolkit, alongside passive cooling, shading, ventilation, airtightness, and materials such as rammed earth, mud brick and straw bale.
Material strategy shifts with climate zone: heavier mass tends to suit hot days and cool nights, while lighter construction with strong cross-ventilation is often a better fit in more humid country. Ask which local materials have already survived decades of WA weather, and use place records to check construction methods and dates before assuming a material suits your site. Modern equivalents include insulated masonry, ground slabs and earth-based wall systems, explored in our piece on how WA building systems evolved.
These are recognised approaches, not universal answers.
One State, Many Climates: Perth, the South Coast and the North
Heavy mass suits hot days and cool nights, but that logic shifts quickly as you move around the state. The site, the zone, humidity and elevation all move the answer, which is why a Perth brief rarely transfers cleanly to Albany or inland country.
Humidity matters as much as temperature, pushing cross-ventilation, shading and moisture management up the priority list.
Elevation changes things too: WA’s inland and higher country gets cooler nights and seasons that behave differently.
Regional work is already responding. AUDRC’s 2026 to 2027 project has Geraldton students designing a climate shelter for the Maitland Park precinct.
The conclusion is simple, and it follows from those examples: there is no single WA template. Perth house design thinking has to flex with site, zone and humidity, and so does every other region’s.

Retrofitting Older and Heritage Buildings Without Losing Significance
If the last section made one thing clear, it’s that no single template suits every site. The same applies to existing buildings. Retrofitting for comfort and lower energy use works best when it lifts performance without erasing the qualities that made the place worth keeping.
Start with the Heritage Council of Western Australia and the State Register of Heritage Places before you change anything. Those records explain what is protected, so read the building itself for performance. Our guide to heritage conservation in WA walks through the approvals side.
The gains that come most easily, and reversibly, tend to start with insulation, draught sealing, shading and fans. Older buildings can depend on incidental airflow through gaps, so sealing every one of them can backfire. Plan ventilation and airtightness as one job, not two. Get heritage and design advice early too: sorting approvals at sketch stage is far cheaper than unpicking work once building has started.
Right-Sized Homes: A Modern Echo of Older Practice
We’ve looked at working with what’s already there. The next step is choosing how much house you actually need. AUDRC’s project description states Western Australia has hundreds of thousands of empty bedrooms, and suggests smaller dwellings could cut emissions, reduce costs and curb sprawl. Treat that as their stated position rather than a proven figure.
Their right-size suburbs project runs 2026 to 2029 with the WAPC, DPLH, Development WA and councils including Karratha, Greater Geraldton, Wanneroo and Swan, testing smaller, lower-impact alternatives. Related work models density and emissions around METRONET station precincts through 2025 and 2026, linking where we build to what it costs the climate.
Not everyone wants less space, and that’s fine. But an under-used bedroom still carries its share of construction, servicing and energy costs. Many older WA homes were simply smaller and better oriented, so right-sizing looks less like a new idea and more like a return to form. Most briefs begin with a bedroom count; ours begin with how you want to live.
A Practical Checklist Before You Build or Renovate
Right-sizing is one lever. The next is how you site and shape the building.
- Site and layout: Check your NCC climate zone on the ABCB Climate Map, then place living areas on the north side and bedrooms and service areas on the south, following CSIRO’s guidance.
- Shading first: Plan verandah depth, eaves, external blinds and planting to block summer sun before committing budget to glazing upgrades or larger air conditioning.
- Glazing: Keep the window-to-floor area ratio in each room at or below 0.25 and favour north-facing glass over east-facing and west-facing glazing.
- Ventilation: Design cross-ventilation with openings on opposite sides of the building, and treat airtightness and ventilation as one coordinated strategy rather than opposing ideas.
- Verify and get advice early: Read Heritage Council of Western Australia place records and State Register entries for older buildings.
ORA is an accredited architectural practice based in Perth, designing residential, community, commercial, heritage and landscape projects across the Perth metro area and regional Western Australia.

What the Past Can and Cannot Solve
That checklist is a starting point, not a rulebook. Compare before you copy: heritage records and the building itself can show which orientation, shading and ventilation features are worth keeping or reinstating. Treat anything you cannot verify as suggestive, not settled fact.
Shading, orientation and cross-ventilation deserve priority over mechanical fixes. YourHome lists passive cooling and shading as core strategies, and CSIRO centres orientation and cross-ventilation. Respect the numbers on glazing and window-to-floor ratio.
Then design for your actual site. Humidity and elevation change the answer between Perth, the south coast, inland WA and the north, so a Perth solution may not travel. Older WA buildings are useful evidence, not a finished blueprint. Combine what they show us with today’s climate guidance and specialist advice before you commit.
Conclusion
Older WA buildings are a practical design library, not a finished blueprint. Orientation, shading and cross-ventilation still lead, and no single answer covers every part of the state. Right-sizing and thermal mass still matter, but they work best when combined with today’s guidance.
Your next step is simple. Before you build or renovate, review the checklist, gather what you can verify, and bring in specialist advice early. If you need help turning that evidence into a design that suits your site, ORA is an accredited architectural practice based in Perth, working on residential, community, commercial, heritage and landscape projects across the Perth metro area and regional Western Australia. Build with the past in mind, then make it work for the climate ahead.